FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
66 06-30004-0420-20080814
limits get
limits
Use this command to display all the settings of the limits command.
Syntax
get limits
<name_str> is the LDAP profile name.
To see a list of LDAP profiles, enter get ldap_profile profile ?.
Example
If you enter the gets limits command on a FortiMail-400 unit, the output will be similar to this:
FortiMail-400 # get limits
domain level limits
domains with 2 tier admin 25 (25 ) [500]
admins per domain 5 (5 ) [5]
policies per domain 40 (40 ) [40]
profiles per domain 5 (5 ) [5]
system level limits
admin count 20 (20 ) [20]
total domains 500 (500 ) [500]
total user groups 100 (100 ) [100]
members per user group 50 (50 ) [50]
profile count 50 (50 ) [50]
ip policy count 40 (40 ) [40]
outgoing policy count 500 (500 ) [500]
as profile count *175 (*175 ) [175]
av profile count *175 (*175 ) [175]
content profile count *175 (*175 ) [175]
ip profile count *175 (*175 ) [175]
all shared memory size 13954552 (13954552) [268435456] bytes
dynamic shared memory size 10273300 (10273300) [268435456] bytes
(numbers in brackets indicates value to use on next reboot)
[numbers in square brackets indicates maximum allowable values]
(numbers preceeded by * are automatically calculated)
History
Related topics
• set limits domain-level
• set limits system-level general
• set limits system-level groups
• set limits system-level mail-users
• set limits system-level other-profiles
• set limits system-level policies
FortiMail v3.0 MR3 New.
To Next Page
Loading...
