Fortinet FortiMail 3.0 MR4 - System Interface Mode Dhcp

set system interface mode dhcp
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 335
system interface mode dhcp
Use this command to enable or configure DHCP for this interface.
If only the dhcp keyword is used, both connection and default gateway are enabled by default.
Syntax
To enable DHCP on this interface:
set system interface <intf_str> mode dhcp
To enable and/or configure DHCP on the interface:
set system interface <intf_str> mode dhcp connection {enable | disable}
defaultgw {enable | disable}
History
Related topics
• set system interface config
• set system interface mode static
Keywords and Variables Description
interface <intf_str> Enter the name of the interface, port1, for example.
connection
{enable | disable}
Enables or disables connecting to a DHCP server to configure the external
interface.
defaultgw
{enable | disable}
Enables or disables the specified interface to be the default gateway interface.
FortiMail v3.0 New.