set log policy destination event
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 209
log policy destination event
Use this command to enable and log events to a device. You need to enable event logging before
selecting what events to log to a device.
Syntax
To enable and configure events for a device
set log policy destination {console | local | syslog} event status enable
set log policy destination {console | local | syslog} event category
[configuration ha imap login pop3 smtp system updatefailed
updatesucceeded webmail none]
History
Related topics
Keywords/Variables Description Default
status {enable | disable} Enable or disable event log output to a device. disable
category [configuration
login system updatefailed
updatesucceeded smtp ha
webmail pop3 imap none]
Event logging must be enabled for this settings to be
applicable.
• [configuration] log all management events,
such as configuration changes.
• [ha] log all HA events.
• [imap] log all IMAP events. This selection is only
available in server mode.
• [login] log all administrative events, such as user
logins, resets, and configuration updates.
• [pop3] log all POP3 events. This selection is only
available in server mode.
• [smtp] log all SMTP server events.
• [system] log all system-related events, such as
system restarts.
• [updatefailed] log all failed update events.
• [updatesucceeded] log all successful update
events.
• [webmail] log all webmail events.
• [none] to clear all event categories, specify none
without any other event categories.
OFF
FortiMail v2.8 New.
• set log setting local • set log policy destination history
• set log setting syslog • set log view fields
• set log policy destination spam • set log view loglevel
• set log policy destination virus
To Next Page
Loading...
