Fortinet FortiMail 3.0 MR4 - Policy Modify Tp

set policy modify tp
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 295
policy modify tp
Use this command to configure transparent mode settings including transparent mode masquerading
setting. This command is available only in transparent mode.
Syntax
set policy <fqdn_str> modify tp <zone_intr> {yes | no} {yes | no}
History
Keywords and Variables Description Default
<fqdn_str> Enter the fully qualified domain name. No default.
<zone_intr> Specify which zone this domain is in with <zone_intr>. This
determines the interface used to send and receive mail to this
domain.
0
{yes | no} Specify “yes” to hide this FortiMail unit or “no” to not hide it. This
is the Transparent mode masquerading setting.
no
{yes | no} Specify “yes” to use the SMTP server for the this domain, or “no”
to relay the mail for this domain. The default is “no’.
no
FortiMail v3.0 New.