Fortinet FortiMail 3.0 MR4 - Ip_Policy Action; Syntax; History; Related Topics

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
158 06-30004-0420-20080814
ip_policy action set
ip_policy action
Use this command to set the default action to be applied to a connection matching the specified IP
policy.
Syntax
set ip_policy <policy_int> action {scan | reject | tempfail}
History
Related topics
• set ip_policy as
• set ip_policy auth
• set ip_policy av
• set ip_policy content
• set ip_policy ip
Keywords and Variables Description Default
<policy_int> This is IP policy number.
scan Select scan to allow the connection and apply the antispam, antivirus, auth,
content, and session (IP) profiles associated with the IP policy.
scan
reject Select reject to have the FortiMail unit reject connection attempts matching
this policy.
tempfail Select tempfail to have the FortiMail unit reject connection attempts and
report a temporary failure.
FortiMail v3.0 New.