Fortinet FortiMail 3.0 MR4 - System Ddns

set system ddns
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 307
system ddns
Use this command to configure Dynamic DNS for this interface. Set the domain and username using
separate commands.
Syntax
set system ddns server <server_name> domain <domain_str> ipmode {auto |
bind interface <intf_str> | static ip <ipv4_int>} status {enable |
disable}
set system ddns server <server_name> username <username_str> password
<pwd_str> timeout <hours_int>
History
Related topics
• set system interface mode dhcp
• set system interface mode static
Keywords and Variables Description
server <server_name> Select the DDNS server from the list provided:
• members.dhs.org
• dipdnsserver.dipdns.com
• www.dnsart.com
• members.dyndns.org
• www.dyns.net
• ip.todayisp.com
• ods.org
• rh.tzo.com
• ph001.oray.net
domain <domain_str> Enter the domain name that is tied to this username and server.
ipmode {auto | bind | static} Select the method of determining the IP address:
• auto - auto detect the external IP address
• bind - bind the IP address with a specific interface
• static - a specific static IP address
interface <intf_str> Enter the interface to bind the IP address to.
Command only available when ipmode bind is selected.
ip <ipv4_str> Enter the IP address to be the static address.
Command only available when ipmode static is selected.
status {enable | disable} Activate or disactivate this DDNS server.
username <username_str> Enter the username to access this DDNS server.
password <pwd_str> Enter the password to access this DDNS server.
timeout <hours_int> Enter the interval in hours after which your FortiMail unit will contact
the DDNS server to reaffirm your IP address.
FortiMail v3.0 New.