Fortinet FortiMail 3.0 MR4 - Ip_Pool Add_Entry

set ip_pool add_entry
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814 171
ip_pool add_entry
Use this command to add a range of IP addresses to an IP pool profile.
Syntax
set ip_pool <name_str> add_entry <ipv4> <size_int>
History
Related topics
• set ip_pool
• set ip_pool del_entry
• set ip_pool delete
• get ip_pool
Keywords and Variables Description Default
<name_str> This is the name of the IP pool profile.
<ipv4> Enter the Start IP address for the range of IP addresses in this
IP pool.
<size_int> Enter the Range Size. This is the number of available IP
addresses starting with the Start IP address.
FortiMail v3.0 MR3 New.