Fortinet FortiMail 3.0 MR4 - Ip_Policy Match (Gateway and Server Modes); Syntax; History; Related Topics

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
166 06-30004-0420-20080814
ip_policy match (gateway and server modes) set
ip_policy match (gateway and server modes)
Use this command to set the client IP address. The IP policy applies to traffic exchanged when this
client establishes a connection.
Syntax
set ip_policy <policy_int> match <client_ipv4/mask>
History
Related topics
• set ip_policy match (transparent mode)
Keywords and variables Description Default
<policy_int> Enter the IP policy number.
<client_ipv4/mask> Enter the IP address and CIDR subnet of the client. The address
0.0.0.0/0 will include all addresses.
0.0.0.0/0
FortiMail v3.0 New.