Fortinet FortiMail 3.0 MR4 - Mailserver Smtpauth

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
242 06-30004-0420-20080814
mailserver smtpauth set
mailserver smtpauth
Use this command to enable or disable authentication using SMTP, SMTP over TLS, or SMTPS.
If authentication is not configured, clients can still attempt to authenticate, though they will always fail.
Using this command to disable the client’s ability to authenticate will prevent this situation from
occurring.
Syntax
set mailserver smtpauth smtp {enabled | disabled}
set mailserver smtpauth smtpovertls {enabled | disabled}
set mailserver smtpauth smtps {enabled | disabled}
History
FortiMail v3.0 New.
FortiMail v3.0 MR4 Added the smtp, smtpovertld, and smtps options.