Fortinet FortiMail 3.0 MR4 - System Interface Mode Static

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
336 06-30004-0420-20080814
system interface mode static set
system interface mode static
Use this command to enable or configure a static IP for this interface.
When setting an interface to static IP mode, an IP address and netmask must be included.
Syntax
set system interface <intf_str> mode static ip <addr_ip4> <mask_ip4>
History
Related topics
• set system interface config
• set system interface mode dhcp
• set system route number
FortiMail v3.0 New.