Fortress Technologies S1 User Manual

42
Programming the Keypad to the Main Panel
e main panel considers the RFID Keypad to be the same
as a Remote Key Fob, so when programming the Keypad
to the Main Panel, it will be added the same way as Re-
mote Key Fobs.
Using the RFID Keypad
Press any key to wake up the RFID Keypad.
To send an Arm command to the main panel:
[4-Digit User Password], then the Arm button (either the
Lock icon for Away, or the House icon for Home).
To send a Disarm command to the main panel:
[4-Digit User Password], then the Disarm button
(or swipe an RFID Key Tag in front of the Keypad.)
1. Press and hold the Set button until the panel says,
“Please trigger remote control,” and the light begins
to ash red. At this point, release the Set button.
2. To trigger the Keypad, enter the Keypad’s Current
6-Digit Admin Password, then press the SOS button.
e panel will say, “Remote control added successful-
l y.”
3. Press and release the Power button once to exit listen-
ing mode.

Fortress Technologies S1 Specifications

General

Brand	Fortress Technologies
Model	S1
Category	Security System
Language	English