50
To nish, press and release the button on the Smart Out-
let. e light on the Outlet will turn red.
Now your Outlet is now programmed! You can perform a
test by toggling the Outlet on or o from the mobile app.
e light on the Outlet will turn blue when it is on, and red
when it is o.
De-Programming a Smart Outlet
You can de-program a Smart Outlet by following these
steps:
1. Plug in the Smart Outlet to power.
2. Press and hold the button on the Smart Outlet. The red light
will turn off.
3. Press and hold the button on the Smart Outlet again for
about 10 seconds. The red light will flash faster and faster,
and then you’ll see a solid blue light.
4. Unplug the Smart Outlet from the power.
To Next Page
Loading...
Need help?
General
