Foscam Huntvision - Page 30

27
Setup Wizard: You will go to “Setup Wizard” automacally aer your first-login, and you can refer 2.2
Setup by a Web Browser to setup the camera.
Status: Status contains four columns: Device Informaon, Device Status, Session Status and Log, it will
show you various informaon about your camera.
Basic Settings: This secon allows you to configure your camera’s Name, Time, Mail, User account,
Mul-Device, Status Light and Voice Prompt.
Network: This secon will allow you to configure your camera’s IP, DDNS, Wireless Sengs, UPnP and
Port, Mail, FTP and P2P.
Video: This secon allows you to configure Video stream sengs, On screen display, Snapshot sengs,
Privacy Zone (only for P4) and IR LED Schedule.
Detector: This secon allows you to configure Moon Detecon and Sound Detecon.
Record: This secon will allow you to change the record files storage path and the record me.
PTZ: This secon will allow you to change the pan/lt speed and do cruise tracks sengs.
Firewall: This secon explains how to control the access permission by checking the client PC’s IP
addresses.
System: In this panel, you can backup/restore your camera sengs, upgrade the firmware to the latest
version, restore the camera to default sengs and reboot the device.