Foscam Huntvision - Page 35

32
Step 5: Proceed the WiFi configuraon for the camera using Foscam App. Please check the Quick Start
Guide for detail instrucon for WiFi configuraon.
● Why am I not receiving alarm push noficaons on the Foscam App?
Step 1: Be sure the firmware of the camera is running the latest version and the Foscam App has been
updated to the latest version;
Step 2: Verify that the moon/sound detecon sengs are enabled on the camera being monitored;
Login to the camera via a web browser on the LAN and navigate to Sengs > Moon Detecon or Sound
Detecon;
Step 3: Verify the push message feature is enabled on the Foscam APP; Login to the Foscam App and
navigate to App Sengs > General > Push Message and enable the feature by switching on the switch;
Step 4: Verify that the noficaons for the Foscam App are enabled on the smart device and are not
blocked; This should be under the Noficaon Sengs on the Smart Device;
Step 5: Verify if an alarm triggered event occurred on the camera; Login to the camera via the LAN with a
web browser and navigate to Sengs > Status > Log to check the acvity of the camera to see if any alarm
events have been logged by the unit;
Step 6: Remove the camera from the Foscam App temporarily and re-add it.