F3D3 Series Service Manual Error Message Guide / Section 1.4
Questions? Call Franke Technical Support Group For Your Area. Page 2 Copyright 2012 Franke, Inc. All rights reserved.
Doors Stuck
Clear Dispense Area
Check door-open sensor. If
unplugged, plug it in. If faulty,
replace sensor.
Doors Stuck
Clear Dispense Area
Forward (Open) Direction
Press Reset (bottom-right)
touchpad to reset.
Doors Stuck
Clear Dispense Area
Reset
Check 24-volt power to door motor
or run Motor Test. (See SM
Section CLPA – Customer Level
Programming Access) If faulty,
Doors Stuck
Call for Service
Reverse (Close) Direction
Check door open motor for
obstruction.
For Special Models with LON Works Smart Kitchen Package ONLY!
Missing PN/SN
Enter PN/SN
information not available
for LON communications.
Enter PN/SN (part number/serial
number) information, per LON
Installation Instructions