2. MARKING AND GRAPHIC SIGNS
The machine is provided with an identification plate and some pictograms. They must be
known along with the manual to guarantee safe use.
Machine data plate
The adhesive plate applied on the rear enables to identify
the model. It includes the following indications:
Name and address of the manufacturer; machine model
and version; serial number; nominal electrical features;
type and weight of gas used; year of manufacture.
Indication
Lifting equipment hooking points:
This plate indicates the points where the lifting hooks must
be placed to carry out this operation safely. Use a Phillips
screwdriver to unscrew the two side panels of the machine
and position the lifting equipment in the relevant points,
making sure that they cannot accidentally slip off during
lifting operations.
Attention!
Maintenance reserved for qualified personnel. This plate
applied on the rear panel prohibits extraordinary
maintenance and/or repairs to any one but authorised
personnel, whose address is indicated in the space
provided.
Attention!
Do not touch with your hands.
This plate applied on the rear panel of machines with air
cooling indicates that the heat exchanger can only be
cleaned using a brush or vacuum cleaner.
Signal: General danger
Every intervention on the machine must be carried out with
extreme care and in compliance with the regulations on the
prevention of accidents at work in force in the country in
which it is installed.
To Next Page
Loading...
