6.4 MENU
6.4.1 PREHEATING
The Frigomat cream cookers in the CHEF LCD series are machines designed to perform
brief working cycles.
In order to further enhance this performance, the preheating function can be used. It heats
up the water bath fluid up to 80 before processing the product in the tank.
We suggest that you use this practical function while preparing the ingredients and loading
the liquids in the tank. In this way, when the processing cycle starts, the product heating
phase will be short.
Follow these instructions for preheating:
Press the “
” key to access the
main screen of the menu. (fig.1-2).
The entry “PRE-HEATING” is selected
automatically. Press OK to confirm.
Fig.1
Fig.2
Press STOP to end the pre-heating
function.
To Next Page
Loading...
