Dear customer!
Congratulations on choosing a quality product from FROLING.
The Froling FHG Boiler features a state-of-the-art design.
Please read and observe the operating instructions and always keep
them close to the boiler for reference. They contain safety information
and all the operation and maintenance specifications needed to operate
the boiler safely, properly and economically.
The constant further development of our products means that there may
be minor differences from the pictures and content. If you discover any
errors, please let us know.
Subject to technical change.
The FHG boiler is produced using the highest quality materials and a
modern production system. The use of high technology laser cutting and
robotic welding system, accompanied by time honored European design,
craftsmanship and attention to detail, results in a long lasting boiler with
unmatched fit and finish.
With proper installation, operation and maintenance your FHG log wood
boiler will provide years of safe, dependable, economic and earth friend-
ly heating.
This manual contains paragraphs that require your special attention.
These paragraphs are marked with the safety information according to
ANSI Z535 described in chapter 2.
Units of Measurement
Most hardware and fittings on the boiler are metric (some plumbing fit-
tings are British Straight Thread). In this manual the convention used
for dimensions is that values are presented in English units, followed by
metric units in parenthesis, for example: 6” (152 mm).
In this manual temperatures are presented as degrees Centigrade.
Note: A conversion table between Centigrade and Fahrenheit is provided
in chapter 4.3 Setting parameters.
Installation and Warranty Requirements
This product is provided with a limited warranty which is described in
chapter 7.1 Warranty conditions within this manual. The warranty is
contingent upon the successful and legal installation of the boiler. At a
minimum, the installation, adjustment, start up, service, and mainte-
nance of this product must be performed by a licensed professional
heating system installer. Where applicable, the installation must be in-
spected and accepted by the legally responsible entity. Conditions de-
scribed in the text of the warranty for keeping it in force must be fol-
lowed by the owner/ system operator.
If the boiler has been purchased through a dealer, the warranty claim
must be made to the dealer. Otherwise, claims may be made directly to
Tarm Biomass.
Please read the literature enclosed by the manufacturer regarding the
various accessory devices. These devices are warranted by the manufac-
turer, NOT BY Tarm Biomass. These accessory devices must be installed
and used according to the recommendations of the manufacturer.
To Next Page
Loading...
Need help?
General