Failure to follow these instructions could result in property damage, bod-
ily injury, or death. All boilers must be installed in accordance with na-
tional, state, and local plumbing, heating, and electrical codes and the
regulations of the serving electric, water, and gas utilities. Contact local
building or fire officials before installation about restrictions and installa-
tion inspection requirements in your area. This boiler is safety tested
and listed. The FHG boiler does not carry an ASME stamp.
The instructions in this manual and in supporting documentation (addi-
tional instructions, diagrams, and component information provided by
Tarm Biomass) must be followed. If the instructions are in conflict with
local code requirements, the local code requirements will prevail. When
in doubt, contact your dealer or Tarm Biomass. The manual and sup-
porting documentation must be retained by the owner/ system operator
for reference and future use.
The installer is responsible for familiarizing the owner/ system operator
with all aspects of boiler operations, safety procedures, monitoring and
cleaning requirements, shut down procedures, and annual maintenance
requirements.
To Next Page
Loading...
Need help?
General