WARNING
Incorrect inspection and cleaning:
Incorrect or insufficient inspection and cleaning of the boiler can cause serious
faults in combustion (e.g. spontaneous combustion of carbonisation gases / flash
fires) and this can lead to serious accidents and damage!
Take the following precautions:
❒ Clean the boiler following the instructions in the instruction manual. Follow the
boiler operating instructions.
5.2 Required tools
The following tools are required for carrying out cleaning and maintenance work:
Included in delivery:
1 Furnace tool with bracket
2 Spanner for door mountings
3 Socket wrench AF 13
4 53x53x110 cleaning brush to clean the WOS springs
Not included:
5 Spanner or box wrench AF 13
6 Screwdriver set (Philips, flat head, Torx T20, T25, T30)
7 Small brush or cleaning brush
8 Ash vacuum
5
Servicing the system
Required tools
52 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
To Next Page
Loading...
