62
Display Values in "Day / Year / Total" Display Modes
General For the inverter the day begins when it switches on. If the DC supply line is disconnected
and no Fronius Datalogger is connected, the following parameters within the display mode
‘Day’ will be reset after repeating the start-up:
- yield (currency can be selected)
-CO
2
reduction (lbs.)
- maximum power supplied (Watts)
- maximum grid voltage (Volts)
- minimum grid voltage (Volts)
- energy as read by consumption meter
- operating hours for Fronius IG Plus unit
If an optional datalogger is available, the display values listed always apply for the whole
day.
Selecting "Day /
Year / Total" Dis-
play Mode
First Display Value in the "Day" Display
Mode:
First Display Value in the "Year" Display
Mode:
First Display Value in the "Total" Display
Mode:
Select the "Day" or
"Year" or
"Total" display mode
The first display value in the selected dis-
play mode appears.
Use the "Down" (2) key to scroll to the
next display value
Scroll back using the "Up" key (1)
(1) (2) (1) (2)
(1) (2)
1
2
To Next Page
Loading...
Need help?
General