Fronius IG 3000 User Manual

74
Displaying and
Setting Parame-
ters in the "DAT-
COM" Menu Item
Select menu item ‘DATCOM’
Press the ‘Enter’ key
The following displays depend on
whether
- a data connection is available
- a data connection is faulty or an
option is not installed
Available data connection
If there is a data connection available, ‘OK-
COM’ is shown.
Use the ‘Down’ key to select available
data:
e.g. Reset Personal Display Card (‘PD-
CDRST’) ...
... or Reset Interface Card (‘IFCDRST’)
Press the ‘Enter’ key
‘PDCD DONE‘...
...or...
‘IFCDDONE’ is shown
Press the ‘Esc’ key 2x to exit menu
item ‘DATCOM’
1
2
3
4
5

Fronius IG 3000 Specifications

General

Brand	Fronius
Model	IG 3000
Category	Inverter
Language	English