64
Options If the DatCom component for the required options is not available, the message "N.A." (not
available) is shown.
Maximum solar module voltage
Highest reading of solar module voltage
(V) during the observation period
Energy consumption meter reading
(optional Sensor Card/Box and con-
sumption sensor )
energy consumed during observation pe-
riod (kWh / MWh)
Maximum solar module temperature
(optional Sensor Card/Box)
highest temperature reading at solar mod-
ules during observation period (°F)
temperature sensor No. 1
Minimum solar module temperature
(optional Sensor Card/Box)
lowest temperature reading at solar mod-
ules during observation period (°F)
temperature sensor No. 1
Maximum ambient temperature (op-
tional Sensor Card/Box)
highest ambient temperature reading
during observation period (°F)
temperature sensor No. 2
Minimum ambient temperature (option-
al Sensor Card/Box)
lowest ambient temperature reading
during observation period (°F)
temperature sensor No. 2
Maximum irradiance (optional Sensor
Card/Box)
highest irradiance during observation peri-
od (W/m²)
Operating hours
Indicates how long the inverter has been
operating
(HH:MM)
Duration of operation is shown in hours and minutes up to 999 h and 59 min (display:
‘999:59’). After that only full hours are displayed.
Although the inverter does not operate during the night, all sensor data are recorded
around the clock.
To Next Page
Loading...
Need help?
General