78
Max. deviation
Used to enter a % value for how large the difference between the two average values can
be
Threshold
Used to enter a value in Ah for the average solar module string currents for the measuring
channels that will trigger a warning on the display if it is exceeded
Device Info Used to display settings relevant to a utility company. The displayed values depend on the
respective country setup or device-specific inverter settings.
Unit %
Setting range 5 - 99
Factory setting 20
Unit Ah
Setting range 2 - 50
Factory setting 4
Display range Setup / Version / Group / DC-Mode / FIX / User / GMTi / GMTr
/ ULL / LL Trip / UIL max / UIL min / UOL max / UOL min / FIL
max / FIL min / FOL max / FOL min / Max. P AC / GPIS / GFD-
PRv / GFDPR
Setup Country setup
Version Country setup version
Group Inverter software update group
DC mode DC operating mode
FIX Voltage value in V for fixed voltage operation
User Voltage value in V for MPP user operation
GMTi Startup time of the inverter in s
GMTr Restart time in s after a grid error
ULL Grid voltage average value over 10 minutes in V.
LL Trip Detection time for long-term voltage monitoring
UIL max Upper inner grid voltage value in V
UIL min Lower inner grid voltage value in V
UOL max Upper outer grid voltage value in V
UOL min Lower outer grid voltage value in V
FIL max Upper inner grid frequency value in Hz
FIL min Lower inner grid frequency value in Hz
FOL max Upper outer grid frequency limit value in Hz
To Next Page
Loading...
