Fronius Primo 3.0-1 Installation Instructions

Proper use also includes
-
carefully reading and obeying all the instructions and all the safety and
danger notices in the operating instructions
-
performing all stipulated inspection and maintenance work
-
installation as specified in the operating instructions
When designing the photovoltaic system, ensure that all of its components are
operated within their permitted operating ranges at all times.
Observe all the measures recommended by the solar module manufacturer to
ensure the lasting maintenance of the properties of the solar module.
Obey the regulations of the power supply company regarding energy fed into the
grid.
Explanation of
symbols and
choice of loca-
tion
The inverter is suitable for indoor installation.
The inverter is suitable for outdoor installation.
Because of its IP 65 protection class, the inverter is resistant to
water jets from any direction and can also be used in damp en-
vironments.
In order to minimise the heating up of the inverter, do not ex-
pose it to direct insolation. Install the inverter in a protected
location, e.g. in the vicinity of the solar modules or beneath the
eaves.
Can be used at altitudes of up to 4000 m
IMPORTANT! The inverter must not be installed or used at alti-
tudes above 4000 m.
7
EN

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g