Fronius Primo 3.0-1 Installation Instructions

IMPORTANT! The PE ground conductor of the AC cable must be laid in such a
way that it is the last to be disconnected in the event that the strain-relief device
should fail.
This can be ensured, for example, by making it somewhat longer and by laying it
in a loop.
If AC cables are laid over the shaft of the DC main switch or across the connec-
tion block of the DC main switch, they may be damaged when the inverter is
swung in, or they may even prevent the inverter from being swung in.
IMPORTANT! Do not lay AC cables over the shaft of the DC main switch or
across the connection block of the DC main switch.
If overlength AC or DC cables are to
be laid in loops in the connection area,
attach the cables with cable ties to the
eyelets provided on the top and bot-
tom of the connection block.
Maximum fuse
rating on altern-
ating current
side
18

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g