Fronius Robacta Reamer V Twin - Robacta Reamer V Twin Control Elements, Connections and Mechanical Components; Controls, Connections and Mechanical Components

26
Robacta Reamer V Twin control elements, connec-
tions and mechanical components
Controls, connec-
tions and me-
chanical
components
Side view Front view
No. Function
(1) Standard I/O connection (X1)
for a 24 V DC supply
CAUTION!
Risk of damage to standard I/O connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(2) Compressed air connection
for a compressed air supply at 6 bar (86.99 psi)
(3) "Clamp gas nozzle/cleaning motor on" screw
for manually checking the gas nozzle clamping deviceand the cleaning motor (gas
nozzle clamping device extends/retracts, cleaning motor off/on)
(4) "Lifting device up/down" screw
for manually checking the lifting device (lifting device moves up/down)
(5) "Spray parting agent" screw
for manually checking the spray device (compressed air or compressed air/parting
agent mixture is sprayed out of the parting-agent injection nozzle)
(6) Parting agent adjuster
for setting the amount of parting agent applied
(7) Parting agent container
(8) Lifting device
lifts the cleaning motor and the cleaning cutter when cleaning the inside of the gas
nozzle
(9) Cleaning motor with parting-agent injection nozzle
the cleaning motor drives the cleaning cutter
(10) Protective covering
(7)
(6)
(1)
(2)
(3)
(4)
(5)
(8)
(13)
(9)
(12)
(10)
(11)