Fronius Robacta Reamer V Twin - Adjust the Swivel Mechanism Stop Angle; General; Preparatory Work

64
Adjust the swivel mechanism stop angle
General To make it easier to adjust the stop angle, it is advisable to fit one of the following adjust-
ment aids to the torch neck:
- Robacta Twin 500 adjustment aid, item no. 42,0001,5559
- Robacta Twin 900 adjustment aid, item no. 42,0001,5560
Preparatory work Move the welding torch to the cleaning position
2
Undo the four Allen screws (1)
Remove cleaning device housing co-
ver
Adjust the swivel
mechanism stop
angle
- Banking screw (4) adjusts the left stop angle
- Banking screw (5) adjusts the right stop angle
1
1
2
1
2
(1) (1)
(1)
(1)
3
4