38
Adjusting the lifting device
Adjusting the lift-
ing device
To make it easier to adjust the lifting device, it is advisable to fit one of the following adjust-
ment aids to the torch neck:
- Robacta Twin 500 adjustment aid, item no. 42,0001,5559
- Robacta Twin 900 adjustment aid, item no. 42,0001,5560
NOTE!
Ensure that the coolant lines on the gas nozzle cannot be damaged by the extend-
ing/retracting gas nozzle clamping device.
Ensure that the lifting device is in its lowest position
Move the welding torch to the cleaning
position
1
1
2
1
2
1
3
To Next Page
Loading...
