39
EN
Loosen the Allen screw (2) on the lif-
ting device
Push the lifting device (3) by hand into
its highest position and hold in place
Manually push cleaning motor (4) and
cleaning cutter to the cleaning position
(5)
NOTE!
The cleaning cutter must not touch any
welding torch components.
Fix cleaning motor (4) in this position in
the lifting device (3) - tighten Allen
screw (2) on the lifting device
1
(3)
(2)(4)
(5)
0,5-1mm
.02-.04in.
4
5
6
7
1
2
2
8
To Next Page
Loading...
