Fronius TransTig 2500 User Manual

108
Terms and abbreviations used
General The terms and abbreviations listed here are used in connection with functions that are ei-
ther included in the standard scope of supply or that are available as optional extras.
Terms and abbre-
viations A - F
Terms and abbre-
viations G - H
ACF
AC frequency
C-C
Cooling unit control
dYn
dynamic
Arc force dynamic correction for standard arcs, pulse correction for pulsed arcs or correc-
tion of various welding parameters in CMT (job correction or arc force dynamic and pulse
correction settings in the set-up menu for the Standard control panel)
Eld
Electrode diameter
When "Eld" is selected for the external parameter "E-P", the electrode diameter on the
JobMaster TIG welding torch can be adjusted.
FAC
Factory
Reset welding machine
G-H
Gas post-flow time high
Gas post-flow time at maximum welding current
G-L
Gas post-flow time low
Gas post-flow time at minimum welding current
GPR
Gas pre-flow time
GPU
Gas purger
HCU
Hot-start current
HFt
High frequency time
High frequency ignition
Hti
Hot-current time
(MMA welding)

Fronius TransTig 2500 Specifications

General

Brand	Fronius
Model	TransTig 2500
Category	Welding System
Language	English