2
Intended Use
Frontier Tedders are designed for evenly distributing and drying hay crops only. Frontier will not
cover under warranty a tedder that has been used outside of these crops.
INTRODUCTION
Serial Number
The tedder’s serial number can be found on the
right side tongue directly under the driveline.
Please use this number when requesting service,
seeking information, or ordering parts. For the
operator’s convenience, space to record the se-
rial number, model number, purchase date, and
dealer has been provided inside the front cover of
this manual.
Specications
Specications TD2418 TD2427
Working Width 18' 2" (5.5m) 27' (8.1m)
Transport Width 10' 6" (3.2m) 9' (2.7m)
Gearboxes Sealed/Oil Bath
Rotors 4 6
Arms Per Rotor 7
Arm Construction Round Tubular
PTO/HP Recommended 35 55
Weight 1350lbs 3000lbs
Spindle Size 1-3/8”
Hub 4-Bolt w/ Tapered Bearings
Wheels 4-Bolt Heavy Duty, Painted
Tires 18.5 x 8
Hydraulic Requirement 1000psi 1200psi
To Next Page
Loading...
General