Frymaster FilterQuick Version 2 - Page 14

1-9
Left Display Right Display Action
Filters
Number
and day
Press  to scroll number of times the vat was filtered on that day of the prior
week. Press .
Filters –
prior week
Number
and day
Press  to scroll number of daily filter cycles in the prior week. Press .
Press  button once to return to Info Mode menu, or Exit/Scan button once to
return the controller to OFF.
Filters
bypassED
Number
and day
Press  to scroll number of times the filter prompt was bypassed on that day
in the prior week. Press .
Cooks
Number
and day
Press  to scroll number of cook cycles on that day of the prior week
occurred. Press .
Exit Exit
Press  button once and press  to scroll to desired choice. Once desired
choice is displayed, press  button or press the Scan button once to return the
controller to OFF.
SELECTED
PERIOD
STATS
Press  to scroll Info Mode Menu: Last Dispose Stats, Daily Stats, Selected
Period Stats, Last Load Stats with the desired stats displayed, press .
Date TIME
Press . (This is the date and time the selected period started.)
COOKS Number
Press . (This is the total number of cooks since start of selected period.)
QUIT COOKS Number
Press . (This is the total number of cooks that were cancelled since start of the
selected period.)
On HOURS Number
Press . (This is the total number of hours the fryer was on since start of the
selected period.)
Reset
usage
Yes no
Press  to scroll or to set start of new selected period stats.
Reset
usage
Enter code
Enter 1656.
Complete
Exit Exit
Press  button once and press  to scroll to desired choice. Once desired
choice is displayed, press  button or press the Scan button once to return the
controller to OFF.
LAST LOAD
STATS
With the desired stats displayed, press .
Product
Product
Name
Press .
Started
Number
Minutes
Press . (This is the time the last cook started.)
Actual
time
Number
Minutes
Press . (This is the actual cook time including stretch time.)
Program
time
Number
Minutes
Press . (This is the programmed cook time.)
Max TEMP Number
Press . (This is the maximum temperature of the oil during the last cook.)
Min TEMP Number
Press . (This is the minimum temperature of the oil during the last cook.)
Avg TEMP Number
Press . (This is the average temperature of the oil during the last cook.)
Heat on %
Press . (This is the percentage of the cook time the heat source was on during
the last cook.)
Ready for
Cook
Yes or no
Press . (This displays yes if the fryer was back to set temperature before the
cook cycle was started.)
TPM
With the desired stats displayed, press .
Current Day Current Date
Press  to view TPM.
TPM
Number/– –
Current Day
Press  to scroll for last measured TPM value that day. Press .
NOTE: If not installed; or invalid or no reading is taken, dashed lines are
shown.