1-10
Left Display Right Display Action
TPM
Date
Press to scroll to TPM values for the previous week. Press to view dates.
Exit Exit
Press the Scan button twice to return the controller to OFF.
1.6 Main Menu: Product Setup (Single Setpoint Cooking)
Programming food items is shown below. Ensure the controller is OFF and follow the steps. The right column has the
action necessary to continue. Exit from a programming step at any time by pressing the Exit/Scan key until the display
returns OFF
Left Display Right Display Action
OFF OFF
Press until the controller scrolls INFO MODE, changing to MAIN and
then PRODUCT SETUP.
PRODUCT SETUP
Press .
Product Setup Enter Code
Enter 1650. If loading a default menu on a legacy fryer, use the steps in
the gray fields below. If not, skip gray fields.
Select
Product
Press desired product button.
Long Name
Product name or
button number
Enter product name with letter keys. Advance cursor with . Press
to advance to next product set up feature.
Short Name
Abbreviated
Product name or
button number
Enter four character product name which alternates with the timer during
a cook. Press .
COOKING MODE
SINGLE
SETPOINT
Press . If multiple setpoint or segmented cooking is desired press
MULTIPLE SETPOINT and go to 1.8 and follow the instructions.
Default is SINGLE SETPOINT.
1 Time
0:00 or
previously entered
time
Enter total cook time with numbered keys. Press .
1 TEMPR
350F or
previously entered
temperature
Enter cooking temperature. Press .
1 Sensitivity
Number
Enter the level of sensitivity, 0-9, for the product. Press .
1 alarm time
(Shake Time)
0:00 or
previously entered
time
Enter time in cook cycle for audible alarm for shaking. Press . If set to
0:00 skip to FILTER PROMPT.
1 ALARM NAME SHAKE
Press to scroll through the alarm names (ex. Shake, Stir). Press .
1 ALARM MODE
(Shake Alarm Mode)
AUTO
Press . Default is auto. Press to scroll to Manual shake alarm
mode. Press . Alarm (Shake) Mode when set to auto, cancels the alarm
automatically after a few seconds. Manual requires user action.
1 ALARM TONE
(Shake Alarm tone)
Short
Press to scroll choice of shake alarm tones. Press . Default is
SHORT.
2 alarm time 0:00
Press . Leave at 0:00 if a second alarm is not needed. Enter time if
needed and follow steps above for entering other parameters. Repeat for
third alarm time. (If 0:00 is entered for second alarm, the steps for the
third alarm do not appear.)
Filter PROMPT
0 or previously
entered number.
Enter number of cook cycles before a filter prompt and press .
Instant On
5 or previously
set number
This is the time, in seconds, the fryer heats at 100%, after the product
button is pressed before the controller adjusts the temperature. Enter
value and press . (Default is 5. 0=OFF). NOTE: Instant on time
may need to be adjusted for light cooking loads.
HOLD TIME
0 or previously
entered time.
Enter time in minutes to hold product before discarding. Press .
Exit Exit
Press the button to save changes.
To Next Page
Loading...
