EasyManua.ls Logo

FUELL Flluid 1 - Battery Removal and Installation

FUELL Flluid 1
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Flluid 1
34
USING YOUR FLLUID
Removing the Battery
NOTE
Removing the upper battery (1) or the lower
battery (2).
The batteries are secured to the frame
with a lock.
- Insert key (3) and while supporting the
battery with your hand turn to the left.
- Swing the battery (1) outwards and
remove.
CAUTION
The battery must be fully charged every
two months if not used for a long time.
Failure to follow this CAUTION can lead
to deep discharge of the battery. Dam-
age caused by deeply discharging the
battery is not covered under warranty.
NOTE
Modication of the bicycle may result in
voiding your warranty. Examples of such
modications include but are not limited to
alteration of the gearbox, secondary gear
ratio and the attachment of accessories
and spare parts, which were not released
or approved by FUELL Inc. Service by a
unqualied service center or failure to fol-
low the recommended maintenance inter-
vals may result in the loss of the warranty.
1
1
3
2

Related product manuals