FUELL Flluid 1 - Gear Shifting

Flluid 1
54
MAINTENANCE
Gear Shifting Flluid-1E (Enviolo)
Adjusting the shift cable play
The play on the shift cable can be adjusted
with the adjusting screws (1) located on the
twist grip housing.
Play on the shift cable (2) can be deter-
mined by gently pulling on the outer ca-
ble sleeves in the area of the adjusting
screws. A play of 0.5 mm is correct.
A shift cable play of more than 2 mm can
negatively affect shift quality and reduce
the service life of the shift cable.
When removing and installing the rear
wheel, it can be helpful to create a larger
shift cable play by turning the adjusting
screws, in order to make it easier to re-
move the shift cable ends from the manual
hub interface.
1
1
2
0.5- 1.5 mm