FUELL Flluid 1 - Tire Care

Flluid 1
47
MAINTENANCE
Vehicle Care / Care Products
Care Products
If necessary, the bicycle should be
maintained with commercially available
preservatives and care products.
- As a precaution, treat corrosion-prone
parts regularly, especially in winter.
CAUTION
For plastic parts, do not use silicone-
containing care products and paint
polishes.
- Thoroughly clean the frame and alumi-
num parts after long rides and preserve
them with a commercially available anti-
corrosion agent.
Winter operation and corrosion
protection
NOTE
In the interest of environmental protection,
we ask you to use care products sparingly
and to use only those that are labeled as
environmentally friendly.
If the bicycle is used during the winter
months, road salt can result in considerable
corrosion and damage.
CAUTION
Do not use warm water - increased salt
action.
- Clean the bike with cold water immedi-
ately after the end of the ride.
- Dry the bike well.
- Treat parts susceptible to corrosion with
wax-based anticorrosion agents before
use, and repeat this several times if
necessary.
Repair paint damage
Immediately repair small paint damage with
a paint pen.
Tire Care
If the bike is not going to be used for a long
period of time, it is advisable to park the bike
so that the tires are unloaded.
Do not leave the bike or tire in a warm place
such as a boiler room, for an extended
period of time.
CAUTION
The tire tread thickness must not be less
than 1 mm (.040”).
Driving on curbs, sharp-edged obstacles,
ground bumps, potholes, etc. can cause
damage to the rim or tire (tear of the
carcass or tube) and may break spokes.
Ridingonunder-inatedtiresmayalso
result in similar damage.
Damage from this sort of misuse is not
covered by warranty.