Fuji Electric OPC-PRT - Page 10

9
Table 2: General Hardware Specifications
Item
Description
Power Supply
Directly powered by the inverter
LED Indic ators
Module Status, Network Status, 2 x Ethernet Link/Activity
USB Port
USB 2.0, mini-B 5-pin
Table 3: Ethernet Hardware Specifications
Item
Description
Number of Ports
2 (internal switch)
Standard
IEEE 802.3 10BASE-T/100BASE-TX Ethernet compliant
Communication Speed and
Duplex
100Mbps full (auto sense optimal speed and duplex)
Connector Type
RJ-45 Shielded
Auto MDI-X
Yes (supports all straight-through and cross-over cables)
Cable Type
CAT5-type 8-conductor UTP patch cables
Cable Length
100m per segment max
Topologies
Star/Tree, Linear/Bus/Daisy-chain, Ring (MRP)
Table 4: Modbus/TCP Specifications
Item
Description
Conformance Class
Class 0, Class 1 (partial), Class 2 (partial)
Read Function Codes
Read coils (1), Read input status (2), Read multiple registers (3),
Read input registers (4), Diagnostics (8)
Write Function Codes
Write coil (5), Write single register (6), Force multiple coils (15),
Write multiple registers (16)
Number of Connections
8
Max Read Register Size
125 registers
Max W rite Register Size
123 registers
Register Data Type
16-bit integer
Unit (slave) ID
Ignored, echoed in response
TCP Port
502
Response Time
Min 160us, Typically less than 1ms