1.3 Unpacking and Product Confirmation
1.3.1 Shipment Confirmation
Check the enclosed items. Confirm that the correct quantity of each item was received, and that no
damage occurred during shipment.
• OPC-PRT interface board with spacer and captive M3 x 12mm screw in lower-right corner (refer to
Figure 1).
• One separate M3 x 6mm mounting screw (see Figure 2).
• Type A male to mini-B male USB interface cable (see Figure 3).
Figure 1: OPC-PRT Interface Board
Figure 2: M3 x 6mm Mounting Screw
Figure 3: USB Interface Cable
To Next Page
Loading...