Figure 14: Backup Parameters
Figure 15: Restore Parameters
5.8 Restore Factory Settings
The interfac e card (connected via USB) can be restored to the factory settings. Note that the filesystem
will be reformatted, which will destroy all custom modifications and configurations. Please backup the
configuration before executing this feature. The factory settings can be restored by:
• Right-clicking on the device in the Project panel and choosing Restore Factory Settings.
• Selecting the device in the Project panel and navigating to Restore Factory Settings.
5.9 Help
Links to videos and documents can be found in the Help menu. Please review these links before
contacting technical support for more in-depth assistance.
To Next Page
Loading...