March 30, 2017
Part #10949 © 2017 Fuji Electric
OPC-PRT
Multiprotocol Ethernet Interface
Thank you for purchasing the OPC-PRT Multiprotocol Ethernet Interface.
• This product is designed to connect the FRENIC-Ace series of inverters to Ethernet
communication networks. Please read this instruction manual thoroughly in order to become
familiar with the proper interface handling, installation and usage procedures.
• Improper handling may inhibit correct operation or caus e premature interface failure.
• Please deliver this instruction manual to the end user of the interface, and retain it in an
accessible location.
• For inverter usage instructions, please refer to the applicable inverter instruction manual.
To Next Page
Need help?
General