Besides the new “W EB” folder containing the new web server, the update requires a USB or FTP
connection as described earlier in this section. To update the web server, complete the following steps:
1. Navigate to the card’s file system (see section 7.2 or 7.3).
2. Backup the “WEB” folder if desired by copying it to the local computer.
3. Delete the “W EB” folder from the card’s file system.
4. Copy the new “W EB” folder to the card’s file system.
5. Although it is not typical, if your param.xml file was specially modified (for a custom application, for
example), it may be necessary to re-apply those modifications. Please consult technical support
for any questions related to customized versions of param.xml.
6. Power-cycle or reset the card.
7. Clear your internet browser’s cache to ensure that the new web server content will be properly
loaded from the interface card.
To Next Page
Loading...