At times, it may be convenient to zoom in on a particular gauge or meter in order to more
clearly see the indicator, or to fill the computer screen with a particular gauge’s image.
This can be easily accomplished with the web browser’s Flash Player plug-in by right-
clicking on the gauge and selecting the desired zoom level (refer to Figure 33).
Figure 33: Zooming
6.3.5 Submitting Changes
Whenever any of the gauge window configuration items
in the Dashboard Tab have been changed, the “submit”
button located on the right-hand portion of the web page
must be selected in order to write these settings to the
interface card’s file system. Refer to Figure 34. Note that
submitting the Dashboard Tab configuration does not
require rebooting of the interface card: the changes take
effect immediately, and the interface card continues its
operation without interruption.
Figure 34: Submit Dashboard Changes
To Next Page
Loading...