• Right-click on it in the Discovered Devices panel and choose Go Online from the context-
sensitive menu.
• Hit the <ENTER> key on the keyboard when the device is selected in the Discovered Devices
panel.
• Drag it from the Discovered Devices panel into the Project panel.
• Select it and select Go Online with Device from the Edit menu.
• Select it and click the Go Online button in the toolbar.
When the studio goes online with a device, its configuration is automatically read. While the studio is
online with a device, it will appear in green text in the Discovered Devices panel. The studio may be
online with multiple devices simultaneously.
Uploading a Device’s Configuration into a Project
The current configuration of an online device can be uploaded into the Project panel by selecting a
device under the Online Devices list heading and then:
• Right-clicking on it and choosing Upload Configuration from the context-sensitive menu.
• Dragging it from the Online Devices heading into the Device Configurations heading.
• Selecting it and selecting Upload Configuration to Project from the Device menu.
• Selecting it and clicking the Upload Configuration button in the toolbar.
The device’s configuration will then be added to the list of Device Configurations. Once the
configuration is uploaded into the project, it may be modified.
Removing a Device Configuration from a Project
A configuration can be removed from a proj ect by:
• Selecting the device in the Project panel and dragging it. A trash can icon will appear at the
bottom of the Project panel, and dragging and dropping the device in the trash will remove it from
the project.
• Hitting the <DELETE> key on the keyboard when the device is selected in the Project panel.
• Right-clicking on the device in the Project panel and choosing Remove from the context-sensitive
menu.
• Selecting Remove Selected Item from the Edit menu when the device is selected.
• Clicking on the Remove button in the toolbar when the device is selected.
Going Offline with a Device
To go offline with a device:
• Select the device in the Project panel and drag it. A trash can icon will appear at the bottom of the
Project panel, and dragging and dropping the device in the trash will go offline with it.
• Hit the <DELETE> key on the keyboard when the device is selected in the Project panel.
• Right-click on the device in the Project panel and choose Go Offline from the context-sensitive
menu.
• Select Go Offline with Device from the Edit menu when the device is selected.
• Click on the Go Offline button in the toolbar when the device is selected.
Downloading a Configuration to a Device
To download a configuration to an online device, first select the device under the Device
Configurations heading in the Project panel, and then navigate to Device…Download Configuration
to Device. If the studio is currently online with only one compatible device, then the configuration will be
downloaded to the online device. Otherwise, a device selection prompt is displayed to select which
device to download the configuration to. Do not power off the device or interrupt the connection onc e the
download is in progress as this may corrupt the firmware and/or the configuration.
Stop all other communication to the device when downloading.
To Next Page
Loading...