Configuration of Scan to PC
119
Using the Scan Service
12
Configuration of Scan to PC
Preparations
Prepare the following to use the Scan to PC feature.
Using with FTP
When using with FTP transmission, one of the following FTP servers and an account
to FTP servers (login name and password) are required.
z
Microsoft Windows Server 2003
FTP service of Microsoft Internet Information Server 6.0
z
Microsoft Windows NT Server 4.0, Microsoft Windows 2000 Server, Microsoft
Windows NT Workstation 4.0, Microsoft Windows 2000 Professional, or Microsoft
Windows XP
FTP service of Microsoft Internet Information Server 3.0 or later
z
Mac OS X
FTP service of Mac OS X 10.1.5/10.2.x/10.3.8/10.3.9/10.4.3
z
Novell NetWare
FTP service of NetWare 5.11 or 5.12
Refer to the manual provided with the software for how to configure the FTP service.
Using with SMB
When using with SMB transmission, a computer running on the following OS which
includes a shared folder function is required.
z
Microsoft Windows 95
z
Microsoft Windows 98
z
Microsoft Windows Me
z
Microsoft Windows NT 4.0
z
Microsoft Windows 2000
z
Microsoft Windows Server 2003
z
Microsoft Windows XP
z
Mac OS X 10.2.x/10.3.x/10.4.x
Installation Overview
This section describes the configuration procedure to use Scan to PC on the machine.
The following is the procedure to use the Scan to PC feature.
z
Enabling Port and Setting TCP/IP
Enable the FTP port and SMB port, and then set the machine's IP address.
z
Preparing a FTP folder or SMB folder
Create a folder for transmission destinations on the computer.
To Next Page
Loading...
Need help?
General
