5 Installation When Using TCP/IP (LPD/Port 9100)
44
Installation When Using TCP/IP (LPD/Port 9100)
5
Configuration on the Computer
The following describes the configuration procedure for the computer.
In order to print from the machine, the computer needs to have a print driver installed.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.19).
For information on the driver installation procedure, refer to the manual contained in the CD-ROM of
the Driver CD Kit.
You can also print from a Macintosh using TCP/IP (LPD). You will need optional Adobe PostScript 3
Kit. Refer to the manual contained in the CD-ROM provided with the kit for the print driver installation
procedure.
To Next Page
Loading...
Need help?
General
