EasyManuals Logo

Fuji Xerox DocuCentre-II 2055 Administrator's Guide

Fuji Xerox DocuCentre-II 2055
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
14 Using the Server Fax Service
136
Using the Server Fax Service
14
8 Reflect the values as the machine's setting values.
1) Click [Apply].
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine will reboot and the setting values will be
reflected.
Setting the Server Fax Feature
Enable the Server Fax feature and set the file destination. The following procedure
explains how to set them on CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.63).
1 Start a web browser.
2 Enter the machine's IP address or the Internet address to the address box on the
browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com/
Note When specifying a port number, add “:” and the port number to the end of the Internet
address.
3 Click the [Properties] tab.
4 Click [+] on the left of [Protocol Settings] to display the items in the folder.
5 Click [+] on the left of [Fax] to display the items in the folder.
6 On the tree in the left frame, click [General].
7
On the [General] screen, set [Scan File Transfer Report] under [Fax].
8 Set [Optional Information] under [Job Log].
9 Click [Apply] to reflect the settings.
10 On the tree in the left frame, click [Fax Repository Setup].
11 On the [Fax Repository Setup] screen, set the items under [Fax Destination].
12 Select a protocol.
Note When [FTP] or [SMB] is selected, faxes will be sent to the destination specified under [File
Destination]. When [SMTP] is selected, faxes will be sent to the destination specified in the
E-mail settings.
For details on this setting, refer to the CentreWare Internet Services help.
When [FTP] or [SMB] is selected
Set the repository server that is to be used for the Server Fax feature.
z
IP Address/Host Name and Port (If the port number is blank, FTP:21 or SMB:131 will
be used.)
z
Share (SMB only)
z
Document Pass
z
Login Name

Table of Contents

Other manuals for Fuji Xerox DocuCentre-II 2055

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-II 2055 and is the answer not in the manual?

Fuji Xerox DocuCentre-II 2055 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-II 2055
CategoryAll in One Printer
LanguageEnglish

Related product manuals