10 Using CentreWare Internet Services
86
Using CentreWare Internet Services
10
26 Set the SMTP server.
For information on the settings, refer to "SMTP" (P.86).
Note • Set this item when using the E-mail, iFax, Mail Notice, or Job Completion Notice feature.
27 Set the POP3 server.
For information on the settings, refer to "POP3" (P.87).
Note • Set this item when using the iFAX or E-mail Printing feature and [Receiving Protocol] is set
to [POP3].
SMTP
This section describes the SMTP server settings.
Note • Set this item when using the E-mail, iFAX, Mail Notice, or Job Completion Notice feature.
1 Start a web browser.
2 Enter the machine's IP address or the Internet address to the address box on the
browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add ":" and the port number after the Internet address.
3 Click the [Properties] tab.
4 Click [+] at the left of [Protocol Settings] to display the items in the folder.
5 Click [SMTP].
6 Set the SMTP server.
1) Set [Server Address].
2) Set [Port Number].
Note • Do not use the numbers of any other ports.
3) Set the SMTP authentication method using the [Send Authentication] pull-down
menu.
To Next Page
Loading...
Need help?
General
