Network Setting Items (Port/Protocol) for CentreWare Internet Services
85
Using CentreWare Internet Services
10
13 Set the print method using the [Incoming E-mail Print Options] pull-down menu.
Note • Set this item when using the E-mail Printing feature.
14 Set the print method using the [Incoming iFAX Print Option] pull-down menu.
Note • Set this item when using the iFax feature.
15 Set the print method using the [Output Destination for Incoming E-mail] pull-down
menu.
Note • This item appears only when the machine has two or more output destinations by being
equipped with optional components, such as a finisher.
16 Set the print method using the [Auto Print Delivery Confirmation Mail] pull-down menu.
Note • Set this item when using the E-mail Printing feature.
17 Select the [Enable] check box to enable [Print Error Notification E-mail].
18 Select the [Enable] check box to enable [Response to Read Receipts].
Note • Set this item when using the E-mail Printing or iFax feature.
19 Click [E-mail] in the [Protocol Settings] folder.
20 Set the e-mail sending/receiving restriction.
Note • Set this item when using the iFax or E-mail Printing feature.
1) Select either [Enable Receive] or [Disable Receive] from the [Domain Filtering] pull-
down menu.
2) Click [Edit].
3) Specify the domain to be permitted if you permitted the receiving transmission, or
specify the domain to be rejected if you rejected the receiving transmission.
4) Click [Apply].
21 Set the sender.
1) If enabling [Allow Authenticated Users to Edit "From:" Field when: ], select either
one of the [Address Book (LDAP) Search Successful] or [Address Book (LDAP)
Search Failure] check boxes.
2) If enabling [Allow Guest Users to Edit "From:" Field], select the [Enable] check box.
3) If enabling [Allow Authenticated Users to send Email despite Search Failure],
select the [Enable] check box.
4) If enabling [Edit "From:" Field when Authentication is not Required], select the
[Enable] check box.
22 Set the default subject to [Default] under [Subject].
23 Set the message.
1) Set the default message to [Default] under [Message Body].
2) If enabling [User], select the check boxes to be enabled.
3) If enabling [Attachment], select the check boxes to be enabled.
4) If enabling [Device Information], select the check boxes to be enabled.
24 Set the default signature to [Default] in [Signature].
25 Reflect the values as the machine's setting values.
1) Click [Apply].
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine will reboot and the setting values will be
reflected.
To Next Page
Loading...
Need help?
General
