Fuji Xerox DocuCentre-IV 4070 User Manual

Error Code
453
Problem Solving
15
012-259
012-260
012-261
012-263
012-264
012-265
012-266
012-268
012-269
012-280
012-282
012-283
012-284
012-291
012-293
012-294
012-295
012-296
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-311
012-313
012-314
012-315
012-349
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-454
[Cause] Finisher Tray is full of paper.
[Remedy] Remove all the sheets of paper from Finisher Tray.
012-455
[Cause] Booklet Tray of the finisher is full.
[Remedy] Remove all the sheets of paper from Booklet Tray.
012-456
[Cause] Output Tray is full of paper.
[Remedy] Remove all the sheets of paper from Output Tray.
012-500
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
013-210
013-211
013-212
013-213
013-220
[Cause] An error occurred in the Booklet Unit.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Fuji Xerox DocuCentre-IV 4070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 4070
Category	Copier
Language	English